Self-priming Novax gear pump, suitable for the transfer of all liquids including hot.
Gearmotors can aspirate the fluid up to a maximum of 2 meters in altitude without being charged (liquids must be cleaned without suspended bodies); if the elevation is higher, it is sufficient to place a non-return valve at the end of the suction pipe and fill it up to the pump. To increase the suction capacity, pour approximately 10 ml of the liquid to be pumped into the pump. However, it is always important to approach the pump to the liquid container to be discharged. If the pump runs dry for more than 10 seconds there is a risk of damaging it. Never operate the pump without the hose clamp.
Always attach the supplied filter to the suction hose before starting the pump.
The G 20 pump can be operated continuously at a maximum pressure of 2 bar (0.2 MPa).
Characteristics:
Liters/hour max: 900 (15l/min)
H max(m): 25
HP: 0.6
W: 450
rpm: 1450 min
Max liquid temp. 35°C
Maximum viscosity 7E (SAE 30-90 cSt)
Hose Holder Diameter: 20mm
Weight: 6 kg
The pump body is made with NOVAX technology thanks to which the surfaces in contact with the liquid are made more resistant to wear and oxidation, the hydraulic part is made of a special alloy coated with antioxidant treatment, the gears are made of steel INOX.